Aluminium and laminated insulated
body
Purpose:
Insulated
body – is a closed insulated body, that is designed for
transporting chilled goods, with provision of possibly stable
interior temperature.
INSULATION PRAMETERS:
Heat
transmission coefficient – aluminium coating (tests carried out on
a body with dimensions of 3320 x 1920 x 1860 mm):
- for the walls - 0.60 W/m2K
- for the floor - 0.70 W/m2K
DESCRIPTION OF A STANDARD
ALUMINIUM BODY CONSTRUCTION:
- Floor – flat, insulated – thickness of insulation from 80 up to 140 mm (depending on type of vehicle and requirements). Strong construction made of steel thin-walled sections. Inside coating made of waterproof plywood covered with riffled or plain aluminium plate. Bottom coating – laminate material without gel coat. Insulation material is ecologic polyurethane foam.
- Intermediate frame – made of steel thin-walled sections, blast cleaned and protected against corrosion with polyurethane agents (priming paint – x2 and chassis surface paint).
- Outside and inside coating – aluminium plate, painted.
- Insulation material (walls, roof and door) - ecologic polyurethane foam.
- Outside fittings – aluminium sections, painted.
- Rear frame – construction welded from acid-proof steel plate.
- Inside finishing – raw aluminium angle sections.
- Body fitting (hinges, lock, door protections) – acid-proof steel.
Equipment:
- double rear door – opening angle of 270° and side door (right) – opening angle of 180°,
- interior lighting controlled from the driver’s cab (2 up to 4 lamps) – depending on the length of the body, hidden in the roof panel,
- entrance ladders – under the floor: rear and side doors,
- anti-collision barriers (against bicycles), contour lights – according to road traffic regulations.
- Walls, roof and doors – are 3-ply construction (plate – foam – plate), characterised by high stiffness and strength, manufactured for ready body size. Wall thickness is 40 mm. The whole construction is riveted and glued to guarantee suitable strength, stiffness and best possible conditions of insulation.
DESCRIPTION OF STANDARD LAMINATED
BODY CONSTRUCTION:
- Intermediate floor and frame – as above.
- Outside and inside coating – laminated material, painted.
- Insulation material (walls, roof and door) - 40 mm thick polystyrene.
- Walls, roof, doors – laminar glued boards, plain on entire surface, construction of: Laminate with gel coat (outside) – polystyrene – plywood – laminate, manufactured for ready body size. The boards are characterised by high stiffness and strength. Total wall thickness is 50 mm.
- Laminate bodies are characterised by very high durability and indicate lower value of heat transmission coefficient.
Optional and additional equipment:
- possibility of manufacturing an additional side door in the left side wall,
- regular non-insulated floor made of waterproof plywood covered with riffled or plain aluminium plate,
- leak-proof anti-slip floor – made of polyurethane material of high abrasion resistance,
- leak-proof floor – made of polyurethane material of high abrasion resistance,
- ventilating windows (grates), mounted in the upper section of the front wall and in lower section of the rear door,
- interior equipment – according to the customer's requests
- loading platform.
- refrigerating aggregate.
|
